MEMS Full/Dual 2x2 PM Fiber Optical Switch

(cross-connecting PM configuration)
  • High Reliability
  • Ultra-Small Size
  • 1260 -1610 nm
  • SM and PM
  • Low Cost
  • Intrinsic Tolerance to ESD
  • Direct TTL Control

Click 'Spec Sheet' for available configurations/part#


The MEMS Series Full and Dual Full 2×2 PM Fiberoptic switch connect optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent-pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movement instead of rotation.

This novel design significantly reduces packaging requirements and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost.


There are no reviews yet.

Be the first to review “MEMS Full/Dual 2×2 PM Fiber Optical Switch”

Your email address will not be published.

 etMEMSTM Latching with Built-in Driver Switch        Min Typical Max Unit
Operation Wavelength Single Mode            1260~1360 and/or 1510~1610 nm
Multimode                810~890 and/or 1260/1360
Insertion Loss [1], [2]      0.6 1.0 (1.2 [3]) dB
PDL (Single mode) 0.1 dB
Return Loss [1] Single Mode           50 dB
Multimode           35
Cross Talk [1] Single Mode           50 dB
Multimode           35 dB
Switching Time       10 ms
Repeatability                                                              ±0.05 dB
Repetition Rate                                                                 20           Hz
Durability            109 Cycle
Switching Type             Latching type with Build-in Driver
Operating Temperature             -5      70 oC
Storage Temperature             -40      85 oC
Optical Power Handling    300      500 mW
Package Dimension 18.5L x 12W x 8.6H mm
Fiber Type Single Mode                     SMF-28, or equivalent
Multimode                   MM50/125, or equivalent

[1]. Excluding connectors.

[2]. Multimode IL measure @ Light Source CPR<14 dB.

[3]. Dual band, and Dual 1×2, Full 2×2, Dual Full 2×2.