MEMS 1×2, 2×2 Fiber Optical Switch - Latching

(built-in driving circuits)
Features:
  • High Reliability
  • Ultra-Small Size
  • 1260 -1610 nm
  • SM and PM
  • Low Cost
  • Intrinsic Tolerance to ESD
  • Direct TTL Control

EMAIL ENQUIRY NOW

SKU: MESW, MEDU, MEQU, MEPM

The etMEMS™ Series Fiber Optical Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a proprietary thermal activated micro-mirror, moving-in and -out optical paths, uniquely featuring ultra small size, rugged. The MEMS Latching type with built-in driver switches can be directly mounted on printed circuit board with configurations of 1×1, Dual 1×1, Quad 1×1, 1×2, Dual 1×2, Full 2×2, and Dual Full 2×2 Single mode and Multimode.

This advanced design offers unprecedented high stability and high reliability as well as low cost advantage.

Reviews

There are no reviews yet.

Be the first to review “MEMS 1×2, 2×2 Fiber Optical Switch – Latching”

Your email address will not be published. Required fields are marked *

 etMEMSTM Latching with Built-in Driver Switch        Min Typical Max Unit
Operation Wavelength Single Mode            1260~1360 and/or 1510~1610 nm
Multimode                810~890 and/or 1260/1360
Insertion Loss [1], [2]      0.6 1.0 (1.2 [3]) dB
PDL (Single mode) 0.1 dB
Return Loss [1] Single Mode           50 dB
Multimode           35
Cross Talk [1] Single Mode           50 dB
Multimode           35 dB
Switching Time       10 ms
Repeatability                                                              ±0.05 dB
Repetition Rate                                                                 20           Hz
Durability            109 Cycle
Switching Type             Latching type with Build-in Driver
Operating Temperature             -5      70 oC
Storage Temperature             -40      85 oC
Optical Power Handling    300      500 mW
Package Dimension 18.5L x 12W x 8.6H mm
Fiber Type Single Mode                     SMF-28, or equivalent
Multimode                   MM50/125, or equivalent

[1]. Excluding connectors.

[2]. Multimode IL measure @ Light Source CPR<14 dB.

[3]. Dual band, and Dual 1×2, Full 2×2, Dual Full 2×2.