LightBend™ 1x1, 1x2 High Power Optical Switch

5W
Features:
  • Low Optical Distortions
  • High Isolation
  • High Reliability
  • Fail-Safe Latching
  • Epoxy-Free Optical Path

EMAIL ENQUIRY NOW

SKU: LBPM, LBHP, LBMH, LBPH

The LB series 1×1, 1×2 High Power OptoMechanical fiber optic switch can be configured as either a 1×1 switch or a 1×2 switch. Based on Photonwares’s patent pending, it can work in high optical power up to 10 W. The switch is driven by a pulsed electrical signal, and the latching operation preserves the selected optical path after the drive signal has been removed. Its integrated status contacts to provide an electrical readout of the switch position. It is designed for high optical power and some specific applications. Electronic driver is available for this series of switches. The switch is bidirectional.

Reviews

There are no reviews yet.

Be the first to review “LightBend™ 1×1, 1×2 High Power Optical Switch”

Your email address will not be published. Required fields are marked *

LB Series 1x1, 1x2 HP Switch     Min Typical Max Unit
 Operation Wavelength         530, 850, 980, 1060, 1310, 1550 nm
 Insertion Loss ¹ >850nm: 0.5 0.8 dB
530nm: 0.7 1.2 dB
 Wavelength Dependent Loss 0.25 dB
 Polarization Dependent Loss 0.1 dB
 Return Loss ¹        55 dB
 Cross Talk ¹        50 dB
 Switching Time 3 10 ms
 Repeatability ±0.02 dB
 Durability        107 Cycle
 Operating Voltage          4.5 5 6 VDC
 Operating Current (Latching/Non-Latching)          30 60 mA
 Voltage Pulse Width (Latching)                              20 ms
 Switching Type           Latching / Non Latching
 Operating Temperature         -5 70 oC
 Optical Power Handling     10   ² W
 Storage Temperature        -40 85 oC
 Package Dimension             36.0L x 26.0W x 8.2H mm
Note:
  1. Exclude connectors.
  2. Continuous operation, for pulse operation call.
  3. Light source CPR<14dB.