Fiber Optical Phase Modulator/Switch - NanoSpeed™

60ns rise/fall, 500kHz, low loss, bidirectional, 850nm to 1620nm, 0 to 70 °C
Features:
  • High Reliability
  • High Speed
  • Low loss
  • Compact

ENQUIRE NOW

SKU: NSPM

The NS Series fiber optical phase modulator/switch is based on a patented electro-optical configuration, featuring low optical loss and wide temperature operation with built-in compensation. The device dynamically controls the optical phase of the transmitting light, meeting the most demanding requirements of continuous operations over 25 years and non-mechanical ultra-high reliability (passed Telcordia and space qualifications). The device is bidirectional in which the input and output ports are interchangeable.

This device is mounted on a specially designed electronic driver using a 5V TTL control signal through SMA input and a 12V power supply (wall pluggable). The maximum phase change can be adjusted by a pot on the board.

Reviews

There are no reviews yet.

Be the first to review “Fiber Optical Phase Modulator/Switch – NanoSpeed™”

Your email address will not be published. Required fields are marked *

NanoSpeed P Series Switches Min Typical Max Unit
Insertion

Loss [1]

1900-2200nm 0.8 1.8 dB
1260~1650nm 0.6 1.0
960~1100nm 0.8 1.3
780-960nm 1.2 1.5
520 – 680nm 1.5 2.3
IL Temperature Dependency 0.25 0.5 dB
Polarization Dependent Loss (Non PM) 0.15 0.3 dB
Polarization Mode Dispersion (Non PM) 0.1 0.3 ps
Return Loss 45 50 dB
Phase Change 90 Degree
Analog Modulation rate [2] DC 50 200 KHz
Digital Modulation Rate [3] DC 1 MHz
Optic power

Handling [4]

Normal power version 300 mW
High power version 5 W
Operating Temperature Standard -5 75 oC
Special version -30 85
Storage Temperature -40 100 oC

[1] Measured without connectors.

[2] The phase change is proportionally to the 0-5V control signal

[3] The maximum phase change is set at a predetermined value

[4] Defined at 1310nm/1550nm. For the shorter wavelength, the handling power may be reduced, please contact us for more information.