UV-IR No-Gap Fast 1x1, 1x2, 2x2 MEMS Fiber Optical Switches, 0.4ms

Features:
  • Ultra Low Loss ~0.2dB
  • Ultra Broadband 350nm-5500nm
  • Little Wavelength Dependence
  • Little Temperature Dependence
  • Fast < 0.4ms
  • Vibration Insensitive
  • SM, PM, MM
  • Bidirectional
  • 50Hz Repetition

Email Inquiry
Fast Quote-Select Part #
Special Order

SKU: FFSW

The FF Series fiber optic switch provides exceptional performance with nearly lossless transitions, ultra-broadband capabilities with little wavelength dependence, which is only limited by fiber characteristics, minimal temperature dependence, a large on/off ratio, vibration insensitivity, and low cost. This version is specially designed for fast optical switching in less than milliseconds on both the rise and fall, as well as a high repetition rate reaching 50Hz. It connects optical channels by fiber-to-fiber direct coupling using a silicon-based micro-mechanical auto-alignment platform that is wafer-level produced in-house. The established optical path has no air gap, uses no lens or coating, and eliminates unwanted surface reflection-related issues. The platform is robust and insensitive to temperature and vibration. The FF Series switch can accommodate all types of fibers with 0.125mm outer diameter, including SM, MM, PM, double cladding, bendable, large, and small core. The FF switches uniquely provide performance no other technologies can match.
The FF switches are activated via an electrical relay. The latching operation preserves the selected optical path after the electrical power is removed. The switch is bidirectional and conveniently controllable by 4.5V.

Single-Mode Selection 1×2
Fiber Type SM400
SM450 SM600 Hi780 SM800 SM980
Hi1060 SM28 SM1950
Wavelength Range* 360 – 530nm 480 – 650nm 620 – 650nm 760 – 800nm 830 – 870nm 980 – 1550nm 960 – 1080nm 1020 – 1900nm 1.7 – 2.3 µm
Insertion Loss <3dB <1.3dB <1.3dB <1 dB <1dB <1dB <0.9dB <0.4dB ≤0.4dB
Isolation 70 dB 70 dB 70 dB 70 dB 70 dB 70dB 70 dB 70 dB 70 dB
Max Optical Power 0.2W 0.2W 0.3W 0.4W 0.5W 0.2W 0.7W 1W 1W
Datasheet
Price $𝟣,𝟥𝟧𝟩 $𝟣,𝟣𝟧𝟫 $𝟫𝟤𝟪 $𝟫𝟤𝟪 $𝟫𝟤𝟪 $𝟫𝟢𝟫 $𝟩𝟣𝟣 $𝟧𝟤𝟨 $𝟫𝟣𝟣
Buy buy_now buy_now buy_now buy_now buy_now buy_now buy_now buy_now buy_now
*The wavelength dependence is solely determined by the fiber property
Polarization-Mode Selection 1×2
Fiber Type PM405
PM460 PM630 PM780 PM850 PM980 PM1550 PM1950
Wavelength Range* 400 – 680nm 460 – 700nm 620 – 650nm 760 – 800nm 830 – 870nm 960 – 1080nm 1260 – 1650nm 1850 – 2200nm
Insertion Loss <3dB <3dB <1.5dB <1.4dB <1.3 dB <1.1dB <0.5dB <0.7dB
Isolation 70 dB 70 dB 70 dB 70 dB 70 dB 70 dB 70 dB 70 dB
Datasheet
Price $𝟣,𝟩𝟪𝟢 $𝟣,𝟨𝟥𝟤 $𝟣,𝟥𝟤𝟦 $𝟣,𝟤𝟤𝟧 $𝟣,𝟤𝟦𝟧 $𝟣,𝟢𝟢𝟪 $𝟫𝟪𝟣 $𝟣,𝟩𝟤𝟥
Buy buy_now buy_now buy_now buy_now buy_now buy_now buy_now buy_now
*The wavelength dependence is solely determined by the fiber property
Multi-Mode Selection 1×2
Fiber Type MM 50/125
MM 62.5/125 FG50LGA MM 105/125 STP 50/125
Wavelength Range* 350 – 2500nm 350 – 2500nm 350 – 2500nm 350 – 2500nm 700 – 1000nm
Insertion Loss ≤0.3dB ≤0.3dB ≤0.3dB ≤0.5dB ≤0.5dB
Isolation 50dB 50dB 50dB 50dB 50dB
Datasheet
Price $𝟧𝟫𝟢 $𝟨𝟤𝟧 $𝟣,𝟥𝟨𝟦 $𝟩𝟫𝟢 $𝟫𝟪𝟪
Buy buy_now buy_now buy_now buy_now buy_now
*The wavelength dependence is solely determined by the fiber property
Electronic Driver Selection
Type 1×2
Pushbutton and USB Interface with GUI
Datasheet
Price $𝟦𝟧𝟪
Buy buy_now

Qty: 1 | $1225 | FFSW-F12742331 | 1x2 780 nm PM780 900um tube 1.0m None

Reviews

There are no reviews yet.

Be the first to review “UV-IR No-Gap Fast 1×1, 1×2, 2×2 MEMS Fiber Optical Switches, 0.4ms”

Your email address will not be published. Required fields are marked *