CrystaLatch™ 1×1, 1×2 Non-Latching Fiber Optical Switch

The CL Series 1×2 Non-latching fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical
configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all-solid-state CL 1×2 fiber-optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.
The switch also has built-in circulator
and isolator functions. An electronic driver is available for this series of switches.

CrystaLatch™ 1x1, 1x2 Non-Latching Fiber Optical Switch

The CL Series 1x2 Non-latching fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all-solid-state CL 1x2 fiber-optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time. The switch also has built-in circulator and isolator functions. An electronic driver is available for this series of switches.

 

Parameters Min Typical Max Unit
Operation Wavelength[1] 1520 1550 1580 nm
1295 1310 1325
Insertion Loss[2] 0.7 1.0 dB
Cross Talk[2] 40 50 dB
Return Loss[2] 50 55 dB
Polarization Dependent Loss 0.1 0.2 dB
Polarization Mode Dispersion 0.1 0.2 ps
Switch Speed (Rise,Fall) 5 50 200 us
Repetition Rate 2K Hz
Optical Power Handling[3] 300 mW
Operating Temperature -5 70 °C
Storage Temperature -40 85 °C
Switch Type Solid State Non- Latching
Fiber Type Corning SMF-28
Package Dimension 58.2 L x 8.4 W x 8.4 H mm

Notes:

    [1] Agiltron can achieve same SPEC at L band
    [2] Measured without connectors
    [3] High power version available

Question Title:

Please summarize your question

Your Question:
Your Name:

Tell us your name